Mounting Brackets 1.0
Mounting Brackets 1.0

Mounting Brackets 1.0

$110.00

Besoin de remplacements ou de mises à niveau ? Les supports de montage iKamper 1.0 sont disponibles pour remplacer les supports endommagés ou perdus, ou pour s'adapter à différentes configurations de racks et de barres transversales.

Caractéristiques
Design original, performance éprouvée
Parfaits pour les véhicules avec des barres transversales hautes, ces supports de montage Skycamp de première génération offrent un ajustement sûr et fiable.
Compatible avec des barres transversales plus hautes et plus larges
Compatibles avec les barres transversales de plus de 1,2 po (3 cm) de hauteur et 3,5 po (9 cm) de largeur, offrant une grande flexibilité pour différents systèmes de galerie.
Compatibilité polyvalente avec les tentes
Fonctionnent parfaitement avec les tentes des séries Skycamp, Skycamp 2.0, Skycamp 2X, Skycamp 3.0 et X-Cover pour une installation sans tracas.
Spécifications
Dimensions
1,5 x 8 x 3 po (3,8 x 20,3 x 7,6 cm)
Matériau
Acier inoxydable
Conçu avec soin, construit pour durer
Chaque tente de toit iKamper est fabriquée dans notre usine en Corée du Sud par des artisans qualifiés qui sont fiers de leur travail. De nos coques FRP aux textiles poly-coton respirants, nous choisissons des matériaux qui maximisent la durabilité et le confort dans tous les environnements. Aucun raccourci, aucune sous-traitance — juste un savoir-faire de précision et une qualité inégalée conçue pour durer pendant des années d'aventure.

Customer Reviews

Based on 17 reviews
53%
(9)
18%
(3)
6%
(1)
6%
(1)
18%
(3)
T
Ty

The brackets themselves are great but the quality of the nuts and bolts was HORRIBLE. Several of the nuts and bolts got stuck half way through tightening them and I could not loosen nor tighten them further. I had to use an angle grinder to cut the bolts off. Really disappointing for the price of such a simple product.

W
Wayne

Nice done. Look very secure

D
Daniel

It's easy to install but the bolts often seizes/locks up and won't allow any turning so I had to cut the bolt. It has already happened twice. I was advised to brush the bolts with wire brush upon first use which I will try next time but shouldn't have to do this. It would also be nice if the mounting bracket had some way of securing to prevent theft of the iKamper.

L
Lindy

I have a Thule Xsporter rack that I’m using for the Skycamp RTT. The included mounting brackets were slightly too small so these brackets were required. The bolts that came with this set were not usable. The nuts tightened varying amounts before seizing. Then they would not back off. All of the bolts broke when I tried to remove them. iKamper customer support is nonexistent and I still have had no luck in getting a response of any kind.

Hey Lindy! We are sorry to hear about your experience so far. If you reach out to support@ikamper.com we can send you replacement brackets free of charge!

C
Chase

Had to go with 1.0 mounting brackets due to cross bars. Works as advertised.